Philips L7.1A mode service

L7.1A CTV Service Mode
With special service remote control. Or short M25, M25
on board and then switch on TV. Exit: st-by.



Plilips TV manuals schematic

Philips Y6 CTV mode service

Use the standard remote control an key in a special sequence 0 6 2 5 9 6 followed by pressing the 'MENU' button. If the main menu also appears with the service menu just press 'MENU' again to clear it.


Philips TV manuals schematic

Philips VR220 mode service

Reset to factory settings Disconect from the mains power supply. Press and hold the STANDBY/ON button on the device and reconnect to the mains power supply.Release the button when 'OSD' appears in the VCR display.


Philips TV manuals schematic

Panasonic TX-33AK10.mode service

Bass to max.
Treble to min.
Hold down "index"
Press "-" (minus) on the front of the set



Panasonic TV manuals schematic

Panasonic EURO-2 mode service

CTV Service Mode
In Sound-Menu Low-tone-regel to maximum and
High-tone-regel to minimum. Press 'F' button on TV.
Then press VOL- on TV and REVEAL on remote control in
some time. Select press red and green buttons.
Adjust press yellow and blue buttons. Store press
'STR'. Exit press 'N' on remote control.



Panasonic TV manuals schematic

Panasonic TX-25W3E mode service

Increase the bass to maximum, decrease treble to minimum, press RESET on the remote control and while in the TV-volume. Using the Teletext press RED and GREEN selects the
item with Blue and Yellow line values. To store the new press STORE. To exit NORM (normalization).



Panasonic TV manuals schematic

Panasonic Plasma 3UY mode service

Press the volume down & hold down the button on the plasma TV display.
Press 3 times the STATUS button on the remote control.
Status button is the one below Power button
The Service Menu mode CAT will comes up.
CAT is Computer Aided Test Menu
To select a mode parameter use the cursors keys on the remote control.
And press the Action key {} to access the menu.
To exit mode Press the R button.



Panasonic TV manuals schematic

Toshiba 13A21C TV mode service

Enter DATA SET mode by setting VOLUME to minimum.
Press both VOL. DOWN button on the set and Channel button (6) on the remote control for more than 1 second.
ADDRESS and DATA should appear
ADDRESS is now selected and should "blink". Using the SET + or - keys on the remote,
step through the ADDRESS until required ADDRESS to be changed is reached.
Press ENTER to select DATA. When DATA is selected, it will "blink".
Again, step through the DATA using SET + or - until required DATA value has been selected.
Pressing ENTER will take you back to ADDRESS for further selection if necessary.
Repeat steps 3 to 6 until all data has been checked.
When satisfied correct DATA has been entered, turn POWER off (return to STANDBY MODE) to finish DATA input.



Toshiba TV manuals schematic

TCL M5262 TV mode service

CHASIS Using M5262 IC, PRESS MENU BUTTON THEN INPUT the nimber is 6,4,8,3
change value press volume -/+ or select item press program -/+



TCL TV manuals schematic

TCL T2111A TV mode service

Colour Television Receiver Model:T2111A
· Simultaneously press “DISPLAY” button on remote handset and Volume- button on



TCL TV manuals schematic

Mitsubishi TV mode service

CT21M5E CTV Service Mode
Press Switch 701 on TV motherboard and button 9 on remote control, hold for about 6 second.
Change parametter press chanel up or down.
Change value press volume up or down
Store press '0'. Exit press stand-by.



Mitsubishi TV manuals schematic

KCL TV mode service

Decrese volume to 0, press recall button on remote control, hold down volume - on tv panel simultaneously, press again recall button on remote control, use this step to enter next menu.


KCL TV manuals schematic

JVC mode service

On remote control Press simultaneously Osd & mute unit
Or press simultaneously osd & picture.
Change parameter press channel up or down
Change value press Volume up or down.



JVC TV manuals schematic

Ichiko TV mode service

Press simultaneously volume down on Television control panel & display key on remote control.
Select parameter press channel up or down.
Change value data press volume up or down.



Ichiko TV manuals schematic

GoldStar MC-51B mode service

CTV Service Mode Simultaneously press MENU, Volume -, Program - on
the GoldStar MC-51B television panel.



Goldstar TV manuals schematic

Fujitec TV mode service

Press menu button on remote control twice - recall Q.View - MUTE.


Fujitec TV manuals schematic

China TV LC mode service

At the state of "PRESET"."Ch Exchange",press 2483 to enter factory menu then press
mute, you can translate the pages.
At the last page of factory menu, hold\keep all the ready state & exit by pressing Menu.
Changethe enactment CH+/CH- choose the item which you want to change.
Vol+/Vol- change the item you have choosed.
LOGO Setting Key
0/1:Logo vertical position adjust
2/3:Logo Horizontal position adjust
4:Logo color adjust
5:Logo font zise
6:Switch line for adjust
7:reset logo position
Menu:save & exit
CH+/CH- : select the caracter to be adjust
Vol+/Vol- : Adjust the selected character



China TV manuals schematic

AKIRA 3Y11 service mode

Key location Steps to enter into the Factory Mode
user remote 1) Press and release key "MENU"
user remote 2) Press and release key "MENU"
user remote 2) Press and release key "Q. VIEW"
user remote 2) Press and release key "MUTE"



Akira TV manuals schematic

AIWA VX series TV mode service

Disconnect the AC line for more than 30 minutes, or bypassing the condenser to Back-Up
maintains programming. Set the volume to a minimum, and simultaneously press the VOL-key 9 in the C / R. With the buttons 1-7 (or 1-8 in
some models) will select the different modes (sub-menu) to adjust. With VOL + / - values are adjusted. Press 8 (or 0 in some models) for
exit and save.



AIWA TV manuals schematic

Toshiba TV mode service

TV No menu on TV panel
Press AV&F Simultaneously, enter this code 1048 on remote control of Toshiba Television,



Toshiba TV manuals schematic

Sony KV-E2531 etc mode service

KV-E2931,KV-E3431,AE-2
CTV Enter Service mode
Turn on the main power switch of the set while pressing any two buttons on the front panel. 'TT' will appear on the upper right corner of the screen. Press the 'MENU' button on the RC. In menu select 'DEMO' and press 'OK'. Select DEVICE coresponding to the adjustment you need. Store: OK. Exit: turn off.



Sony TV manuals schematic

Sanyo TVS-1430MA-2142MA mode service

Two modes of use Service Menu : S and D to enter the Service mode, press Volume on TV panel to 0 keep it pressed,
press DISPLAY on the remote control.
To enter the D mode, once in the Service mode, select VP60,
must have the value 00, then press Volume on TV or released,
press DISPLAY on the remote control. To change channels or adjust
user, without leaving the Sanyo tv service mode, press DISPLAY on Sanyo TVS remote.



Sanyo TV manuals schematic

Projectors TV Sanyo mode service

Factory Menu Access:
Press and hold the {SELECT} and {INPUT} buttons on the Projector at the same time for about 10 seconds.
The Factory Menu will be displayed.
Service Menu Access:
Press and hold the {MENU} and {INPUT} buttons on the Projector at the same time for about 10 seconds.
The Service Menu will be displayed.
Use the {UP} {DOWN} {LEFT} {RIGHT} buttons to move through menus and change values.
To exit, turn the Sanyo Projector Off.

Projector TV manuals schematic

Sanyo C20LB94M mode service

Keep pressing the MENU button on the TV and press the button 2 in the remote control. To adjust the fine tuning, hold the MENU button on the Sanyo C20LB94M TV and
Pressing the MENU button in the remote control of Sanyo C20LB94M TV



Sanyo TV manuals schematic

Sansui TV mode service

With the Sansui TV turned on without OSD, press the remote control of Sansui television, via the hidden key a small hole in it (If you do not have the hole, disarm remote control and find the key that is not accessible externally)(Sansui). The sub menus and items are selected with the corresponding number. The values are adjusted with volume +/-
to exit and save, press 0 (in some chassis may be
Sansui TV.



Sansui TV manuals schematic

Samsung CN5039 TV mode service

Television off possition, press MUTE button, input these number , 1, 8, 2, POWER, enter the menu service principal, to select a sub menu use Channel + / - and volume + / - to enter service mode Samsung CN5039 .
To select items press channel up or down to adjust press volume up or down
To return to the main menu, press MENU, press power to exit and save settings of Samsung tv.
Samsung CN565B, CT5038, CT5066.



Samsung TV manuals schematic

Samsung DY-450 TV mode service

Open the remote control of Samsung Television (the board must have an identity.: D-19H), find the key hidden more below the key TV / VIDEO, it would go to service mode.


Samsung TV manuals schematic

Samsung Plano TV mode service

On TV set press power on R/C go to stand by,press display-menu-mute-power on. Up & down to select Vol+ & Vol- to change data value.


Samsung TV manuals schematic

SAKURA TV MODE SERVICE

From the remote control, press SET MENU to enter (FEATURE), introduce the sequence 4, 7, 2, 5. To select the item you press CHANNEL + / - to adjust the
value press VOL + / -. To save changes press the red button. To
TV exit press.



Sakura TV manuals schematic

RCA GE TV MODE SERVICE

(most models after '94): Turn the TV on. Hold down MENU
and hit POWER and VOL+. Now you're in the service mode, looking at
parameter 0. It will say:
P00 V00
Use the VOL+ key to change the value (V number) to 76. This has to be
done before you can do anything else; it's sort of a password.
Once P00 is set to V76 you can use the Channel + and Clannel - buttons
to select from the first 12 parameters. P13 is another password - set
to 77 to get higher parameters. Depending on the model, another one a
couple of dozen parameters up will require a password of 78. This
varies by model but you will know when you have found it because you
won't be able to advance past it.
The first parameter, P01, is probably the quickest and easiest to
work. It is the Horizontal Frequency control. When you select it,
the TV will lose horizontal sync. Turn it all the way down or all the
way up with VOL- or VOL+ and then get out of setup (if the TV hasn't
shut itself off by then) with the power button.
Here are the parameter tables:
P00 Password (Must set to 76) P14 PLL Tuning
P01 Horizontal Frequency P15 4.58 MHz Trap
P02 Horizontal Phase P16 Video Level
P03 EW DC (Width) P17 FM Level
P04 EW Amplitude P18 B+ Trim
P05 Vertical DC P19 RF AGC Chan 6
P06 Vertical Size P20 RF AGC Band 1
P07 Red Bias P21 RF AGC Band 2
P08 Green Bias P22 RF AGC Band 3
P09 Blue Bias P23 D-PIP Chroma
P10 Red Drive P24 D-PIP tint
P11 Green Drive P25 D-PIP bright
P12 Blue Drive P26 D-PIP contrast
P13 Password (Must set to 77) P27 Factory Tint
P28 Password (Must set to 78)
P100-156 - Tuner alignment parameters. If you fuck with these, the
tuner will have to be aligned by a professional.
Service Menu RCA & G.E. Service menu code 
TV manuals schematic

RCA TV MODE SERVICE

RCA TV set off position, press & hold volume up on TV panel switch ON RCA TV power.
Entering and make change value data press program and change value data press volume.



RCA TV manuals schematic

PIONER TV MODE SERVICE

3rd GENERATION MODELS
Power Down at the panel.
Hold down {INPUT} & {VOL+} buttons on the panel.
Turn on the Plasma at the panel.
The service menu will come up.
Scroll down using the arrow keys.
To exit, power it down.



Pioner TV manuals schematic

PHILIPS VR220/58 VCR MODE SERVICE

Child Lock Cancel Press CHILD LOCK (key-simbol) on the RC
for 5s with the VCR switched on.



Philips TV manuals schematic

philips ANUBIS B CTV HOTEL MODE

ON: Set HOTEL ON in Service Menu. Select
programm 38. Simultaneous press (3 sec)
INSTALL & P- on local keyboard.
OFF: Set HOTEL OFF in Service Menu.



Philips TV manuals schematic

PHILIPS L9H CTV MODE SERVICE

This model also supports the 062596 sequence
followed by [MENU] (service default) or i+]/[OSD] (service mode).



Philips TV manuals schematic

PHILIPS VR210/58 VCR MODE SERVICE

Modulatoroff
Without cassette. Press and hold SYSTEM till 'G591' appears. Press and hold CLEAR(CL) till 'MOFF' appears. Exit: TV/STANBY.



Philips TV manuals schematic

PHILIPS TV MODE SERVICE

VCR Auto ST-BY off Press and hold STOP till [] appears.
Select Value parameter Press pro+/-
Change value pres volume +/-.



Philips TV manuals schematic

PANASONIC TAU TV MODE SERVICE

With the TV on, adjust the volume to a minimum, put the key in OFF-ON TIMER.
Press RECALL on the remote control and simultaneously in the TV-VOL. With keys 1 and
2, selects nodes adjustment (CHK1, CHK2, ...) with the keys 3 and 4 selected items with VOL + / - adjusts the values.



Panasonic TV manuals schematic

PANASONIC MX-3 TV MODE SERVICE

CTV Hotel Mode
ON: Press simultaneously 'OFF TIMER' on remote control and 'CH.UP' local.
OFF: Press simultaneously 'OFF TIMER' on remote control and 'VOL-' local.



Panasonic TV manuals schematic

PANASONIC CT-Z1422 TV MODE SERVICE

Simultaneously press the Volume down button on the TV and press 9 at the remote control for more than 1 second. With channel up or down select options with volume up
or down adjusts the value. To exit, press ACTION in the remote control



Panasonic TV manuals schematic

PANASONIC TX-28W3E TV MODE SERVICE

Adjust the bass to maximum, treble to minimum, press RESET on the remote control and while in the TV-VOL. Using the Teletext press RED and GREEN selects the item with Blue
and Yellow line values. To store
the new press STORE. To exit NORM (normalization).



Panasonic TV manuals schematic

LG FLATRON TV MODE SERVICE

Press OK on remote control & simultaneuosly press OK on TV set, hold until factory mode appear on screen.
Change parameter press channel up or down
Change value press volume +/-



LG TV manuals schematic

KCL TV MODE SERVICE

Decrese volume to 0, press recall button on remote control, hold down volume - on tv panel simultaneously, press again recall button on remote control, use this step to enter next menu.


KCL TV manuals schematic

JVC AV 28 WFT TV MODE SERVICE

For any one do not forgot to write the TV settings down before changing the setting to comensate the RGB picture shift.
For use under DEF Menu, to access service mode press i and mute together.
Settings from three different sets, in various stores so I know the service setting haven't been messed with. To obtain default settings simply use an average of the values below (or try each set), most of settings are similar to with +/- 1 across the three different tv sets.
Mode Dixon Currys Comet
Panaramic TV manuals schematic
1 -8 -2 -11
2 8 9 10
3 -8 -8 -8
4 -4 -5 -5
5 11 10 9
6 15 17 16
7 -4 -4 -4
Full 1 0 0 0
2 -10 -7 -8
3 0 0 0
4 0 0 0
5 -6 -5 -5
6 1 1 0
7 0 -1 0
16:09 1 0 -1 -1
2 34 34 34
3 0 0 0
4 -1 -1 -1
5 -5 -3 -3
6 -2 -1 -4
7 -2 -6 -2
Regular 1 0 0 -1
2 -7 -7 -7
3 0 0 0
4 -2 -2 -1
5 -16 -17 -17
6 0 0 -1
7 1 0 0
14:09 1 0 0 0
2 13 16 13
3 0 0 0
4 -3 -1 -3
5 -6 -7 -6
6 0 1 0
7 0 -2 0

GOLDSTAR TV SERVICE MODE

With the TV on, press MENU on the TV while pressing MENU on the
remote control. With CANAL + / - select the item and VOL + / - changes the data. To save the changes, since the remote control press OK (ENTER) and exit POWER



Goldstar TV manuals schematic

AKIRA TB1238 TV SERVICE MODE

Key location Steps to enter into the Factory Mode
user remote 1) Press and release key "1"
user remote 2) Press and release key "2"
user remote 3) If CH position is not at 12, retry from step1
user remote 4) Press and release key "3"
user remote 5) Press and release key "8"
user remote 6) If CH position is not at 38, retry from step1
user remote 7) Press and release the mute key
user remote 8) Input the password "1","2","3","8"
to unlock password the general secret code is 2175 Success - "M" displayed



Akira TV manuals schematic

AKIRA 14/21S01 TV SERVICE MENU

user remote 1) Press and release key "RECALL"
user remote 2) Press and hold key "V-"
user remote 3) After volume=0, press key "RECALL"
user remote 4) Repeat 3 times



Akira TV manuals schematic

AKIRA 8821 TV SERVICE MENU

Akira TV manuals schematic


Enter to Factory Mode settings
Press and hold key volume down on television.
Volume going to 0, press "DISPLAY" button on remote control.
Select value press program up or down and change the value pres volume up or volume down.
To exit, press and release key "DISPLAY"

TOSHIBA 2150 S5E TV SERVICE MENU


Toshiba 2150 S5E
CTV Service Menu
Press 'MUTE' button. Press and hold 'MUTE' button and press 'MENU' on local keyboard. Select: PR nr.. Adjust: VOL+/-. Store: auto.
Exit: 'STANDBY'. Test picture: 'AV'.



Toshiba TV manuals schematic

TCL TV SERVICE MENU


TCL Television factory Code.
Colour TV TCL Type T2111A.
Switch On TCL television And Simultaneously press “DISPLAY” button on remote handset and Volume- button on tv pannel, select value press pro+/- and change value data press volume +/-.



TCL TV manuals schematic

SHARP TV SERVICE MENU


13J-M100 
Unplug the TV from the wall outlet, press CHANNEL up and volume down, hold the key & plig in th wall outlet.
To reset to default values, press both buttons again for 7
second. Select the item press channel up and channel down, to change data (D) volume up and volume down to exit, press POWER on and off the TV.



Sharp TV manuals schematic

SANYO TELEVISION TV SERVICE MENU


Service Menu Sanyo  TV manuals schematic
Unplug the power cable.
Press and hold the volume down button on the Sanyo TV
while plugging the power cable back into the outlet.
Keep pressing the v0lume down button until
the TV powers on with the Service Menu displayed.
Use the channel + and channel - buttons to select menus.
Use the volume+ and volume - buttons to change value settings.
Some menus might have sub-addresses. Use the
numeric buttons {0} to {7} to adjust sub-item data.
Press the {MENU} button or turn the Sanyo TV off to exit service mode.

SANYO TV SERVICE MENU


With the TV on, press M (memory) on the Sanyo TV for two seconds immediately
pressing MEMORY in the C / Remote, then SOUND to select the item. With VOL
+ / - Values are adjusted.
Sanyo TV ok



Sanyo TV manuals schematic

SAMSUNG PLH403 TV SERVICE MENU


Switch of the TV, press the remote control the following sequence: MUTE button and input the number 1, 8, 2, POWER button,
with volume up or down moves from the menu by pressing MENU button and MUTE switches the data. Press MEMORY button to store data. press DELETE button to exit from the Samsung PLH403 system.



Samsung TV manuals schematic

SAMSUNG EUROPE TV SERVICE MENU


Press the following sequence on the remote control:
DISPLAY, PSTD, MUTE
or SLEEP, MENU, HELP
or DISPLAY, PSTD, SLEEP



Samsung TV manuals schematic

SAMSUNG CS-721 CS-723 TV SERVICE MENU


CS-721
CS-723
SCT52A CTV Service Menu
PICTURE OFF --> SLEEP --> P.STD -->
MUTE --> PICTURE ON



Samsung TV manuals schematic

SAMSUNG TV SERVICE MENU


Press power button on remote control going to STAND-BY mode -->press P.STD --> MENU -->
SLEEP --> POWER ON quckly.



Samsung TV manuals schematic

PIONER PDP-4214 TV SERVICE MENU


Press the {INPUT} button on the remote.
The input list will come up.
Then press the {0} {9} {1} {7} buttons on the remote.
To exit, press the {EXIT} button on the remote.
You can also press the back button when you are
in each category to get back to the main menu.



Pioner TV manuals schematic

PIONER TV SERVICE MENU


4th / 5th / 6th / 7th GENERATION MODELS
Make sure the Plasma and the Media Box are in standby.
Using the remote control:
Press {DISPLAY} button (just press, do not hold) and wait 3 seconds.
Press {LEFT} {UP} {LEFT} {RIGHT} {POWER} buttons.
The Plasma will turn on with the "Information" page displayed.
Press {MUTE} to move through the levels of menus:
INFORMATION
FUNCTION CHECK
COMMON ADJ
OPTION
INITIALIZE
Press the {DOWN} button to move through individual menus.
To exit, power it down. 
TV manuals schematic

PHILIPS 20PT424A,21PT263A TV SERVICE MENU


With the TV unplugged from the network, bypassing the pin 1 of the memory EEPROM (24C08) to earth (ground). Then connect and turn on. With CANAL + / - select item, with VOL + / - adjusts the value. To exit the remote and turn off disconnected from the network.


Philips TV manuals schematic

PHILIPS ANUBIS B CTV SERVICE MENU


Simultaneously press VOL+ & P- on remote control.
Exit: STANDBY.



Philips TV manuals schematic

PHILIPS MD1.2E CTV SERVICE MENU


MD1.2E CTV Service Mode There is a small Service jumper to short on the small signal PCB. When the TV is in this first level service mode, you can go in the second level service mode by pressing both MENU and - keys on top of the TV at the same time. There you can read much parameters and proceed with most of the adjustments. In fact this method let you use an ordinary Remote control but you also need to open the back cover. With the special service remote control, a special code is sent to enter the service mode.


Philips TV manuals schematic

PHILIPS VR220/58 VCR TV SERVICE MENU


VR220/58 VCR
Modulator on/off Without cassette. Press and hold STOP on the
RC and then press STOP/EJECT on VCR.
Select the line 'MODULATOR' on the TV screen or 'MOD+' in the display with P+/-. In the display select 'OFF' / 'MOD-' (modulator off) with VOLor
'MOD+' (modulator on). Confirm with OK.
Exit with MENU
Manufacturer Model Chassis Product Mode Enter



Philips TV manuals schematic

PHILIPS TV SERVICE MENU


VR400/58 VCR
Modulator off Without cassette. Press and hold SYSTEM till 'G591' appears. Press and hold CLEAR(CL) till 'MOFF' appears. Exit: TV/STANBY.



Philips TV manuals schematic

PANASONIC CT-215785 TV SERVICE MENU


Turn on TV, short-circuit points FA1 - FA2. Press ACTION (or MENU) and
VOL + simultaneously. Press POWER on the remote control to select



Panasonic TV manuals schematic

PANASONIC CT-G2159E TV SERVICE MENU


Turn on TV and using the remote control.
Step 1) Select the SET-UP in the main menu and then select the mode CABLE the option ANTENA.
Step 2) Select TIMER icon and set the timer sleep active 30 second.
Step 3) Press ACTION twice to exit the menu and tune to the channel at 124.
Step 4) Adjust the volume to minimum, Press enter again then volume down.
service mode is CHK. To exit press ACTION and POWER simultaneously for two seconds.



Panasonic TV manuals schematic

Panasonic 1996 TV SERVICE MENU


Panasonic TV's after 1996 can be set to "Serviceman Mode" with the following remote control sequence:
First, select the SET-UP icon and select CABLE mode.
Then, select the TIMER icon and set the SLEEP timer for 30 second.
Next, press the ACTION button twice to get out of the menus.
Now, change to channel 124.
Then, adjust the volume to minimum (0).
You're almost there - Hit the VOL down button on the TV itself (not on
the remote) and a red "CHK" should appear in the upper corner.
Now, if you press the ACTION and volume down buttons (again, on the TV, not the remote) you will toggle between AGING and factory setting modes.
Select factory setting modes (Serviceman mode). The POWER button on the remote control will select one of the five Serviceman Adjustment modes.
The modes are B - Serviceman VCJ SUB Adjustments. These include sub-tint, sub-color, sub-brightness, sub-contrast, colorkiller/ABL/gamma, audio and video adjustment, and vertical size.
C - Serviceman VCJ Cut-off adjustments. These include Red, Green
and Blue cut-off, red and blue drive, automatic fine tuning
(AFT), RF AGC (RF gain control), horizontal center, beam limit,
etc.
S - Serviceman Options Adjustments. These involce the PIP and
clock.
M - Serviceman MTS (Stereo/SAP) adjustments.
CHK - the mode you first entered. Normal picture and sound, lets
you check things over and still have a hotkey into the
service menu.
There is one more adjustment that isn't in the five modes, it's
global. When in either the yellow or red CHK mode, you can press
RECALL on the remote control to enter the purity firld check mode.
This lets you select a pure white, red, green, or blue screen. A
good thing to walk away from if you just want to temporarily freak
out the floor manager, but it will be fixed as soon as the TV is
turned off. To get out of Serviceman mode, press ACTION and POWER on the remote control cimultaneously for at least 2 seconds. The TV will momentarily shut off and then comes back on. 
TV manuals schematic

PANASONIC MX-3MX-3CTV SERVICE MENU


CTV Service Mode
Simultaneously press 'RECALL' on remote control and 'VOL-' local. Exit: 'NORMAL' on remote control.



Panasonic TV manuals schematic

PANASONIC PE77U TV SERVICE MENU


Write down all values data before make any change.
Once a value is changed, THE CHANGE IS MADE.
Press Volume down button, Hold down the button ON THE PLASMA TV.
Press three times the RECALL button on remote control.
The Service Menu mode will comes up.
To navigate main menu Use {1} {2} on remote control.
To navigate sub-menu Use {3} {4} on remote control items.
To change item value Use {VOL+} {VOL -} on remote control.
To save Turn off Power to exit service mode.





Panasonic TV manuals schematic

LG TV SERVICE MENU


Lg ein
The quote from the manual is: Adjustment method:1) Enter the adjust mode by pressing the IN-START button which seems to suggest its going to need the remote "in-start" button only exists on service remote mate, part number 105-201M



LG TV manuals schematic

HITACHI TV SERVICE MENU


HITACHI TV set off position, press and hold AV key on HITACHI TV panel, switch on HITACHI TV, Select press channel up or down button, to change value press volume up or down button.
Change setting value as you wish.



Hitachi TV manuals schematic

DIGITEC TV SERVICE MENU


Turn on TV in stby mode
Press and hold the menu buton on remote control till tv set is turn on.
input the number 1,0,1,3 or 1,0,1,4.
Change item move up or down program key
To select value press Volume + or -. To change value.
Store press menu button.



Digitec TV manuals schematic

DAEWOO DTJ28A7 TV SERVICE MENU

Turn on TV, tune in channel 91, enter the MENU, then PICTURE, download all
resolution (Sharpnes), exit the menu, press the keys: red, green and
menu on the remote control
Pressing: MENU,
6, 4, 8, 3. Displays the text "TEST". Click: VCHIP.
Now you can select the number (1,2,3,4, 7,8,9) to enter the
different settings menus. To exit: POWER



Daewoo TV manuals schematic

BOOMBA TV SERVICE MENU

Use type LC8632 series
Press menu on remote control two times - recall Q.View - MUTE.



Boomba TV manuals schematic

AKIRA 5P60 TV SERVICE MENU


user remote 1) Press and release key "CLOCK"
user remote 2) Press and release key "P.M."
user remote 3) Press and release key " "
user remote 4) To exit, press and release key "MENU"



Akira TV manuals schematic

AKIRA UOC 9381 TV SERVICE MENU



Key location Steps to enter into the Factory Mode
user remote 1) Press and release key "MENU"
user remote 2) Press and release key "8"
user remote 3) Press and release key "5"
user remote 4) Press and release key "0"
user remote 5) Press and release key "0"
Success - "M" displayed

Akira TV manuals schematic

AKARI TV SERVICE MENU



Press Menu buton on TV panel, Hold menu with sleep buton on RC use p+/p- to select type if you wish & v-/v+ to decrease or increase data value of Akari televison service mode settings.

Akira TV manuals schematic

KYOTO TV SERVICE MENU



In the Kyoto remote control (RC-F70) press the following sequence: SLEEP, MUTE, DSP, MENU. Channel + / - to select , adjust value with volume + / -. To exit press POWER button .

Kyoto TV manuals schematic

MAJESTIC TV SERVICE MODE



Switch on Majestic TV, press remote control key button: SLEEP, MUTE, DISPLAY, MENU. With channel up and down select the parameters, with VOLUME up and down adjusts the value. To exit Majestic TV service mode press DISPLAY or SLEEP button.

Majestic TV manuals schematic

MEMOREX TV SERVICE MENU



Memorex TV in Stand By mode, from the control remote enter the key following sequence MUTE, DISPLAY, POWER button .
With channel up and down select the parameters, with VOLUME up and down adjusts the television system value. To exit Memorex TV factory mode menu press DISPLAY or SLEEP button.

TV manuals schematic

IRT TV SERVICE MENU



Turn On, ignition pressure in the C / R: MENU, QWIEW, MUTE. With PROG + / - selected 
items, with VOL + / - changes the value of the clock with the key changes 
sub. Menus.

TV manuals schematic

PAGE : -- 01 -- 02 -- 03 -- 04 -- 05 -- 06 -- 07 -- 08 -- 09 -- 10 -- 11 --12 -- 13 -- 14 -- 15 -- Next >>

Kumpulan skema TV / Collection TV schematic

Skema TV Panasonic tc-m19w

Skema TV Panasonic tc-28wg20

Skema TV Panasonic tc-29v50r

Skema TV Panasonic tc-m29

Skema TV Panasonic tc-29FJ20C

Skema TV Panasonic tc-2171

Skema TV Panasonic tc2170t-MX3

Skema TV Panasonic tx2170t-MX3

Skema TV Panasonic 21L3rte

Skema TV Panasonic 21e3rte

Skema TV Toshiba 30HF84_SM

Skema TV Toshiba 34HF81SM

Skema TV Toshiba 32HFX71SM

Skema TV TCL 2188f_300

Skema TV TCL 0EC2136

Skema TV Sanyo DS20424 -

Skema TV Sanyo DS25204SS7

Skema TV Sanyo DS20425SM0

Skema TV Sanyo DS32225SM0

Skema TV JVC 14592

Skaema TV Philips 14gx

Skema TV Philips 20gx

Skema TV Philips 21gx

Skema TV Philips 21cn4462

Skema TV Philips 25gr6770

Skema TV Akira CT-21FGS1

Skema TV Akari ptcs030201

Skema TV Sharp 70DES03SCA0

Skema TV Sharp_DV5150HB

Skema TV Sharp 37DM23HCA1

Skema TV Sharp 70DS05S 0

Skema TV Sharp 63C S03S

Skema TV Sharp 70CS03S

Skema TV TCL 2188f

Skema TV Aiwa 2102

Skema TV Aiwa 2002

Skema TV Aiwa 1202

Skema TV Akai CT2107

Skema TV Akai CT2005E

Skema TV Akai CT2005

Skema TV Akai CT1407D

Skema TV Akai CT1407

Skema TV Hitachi 2090

Skema TV Hitachi 2121RT

Skema TV Hitachi 1421RT

Skema TV Hitachi 2021RT

Skema TV Hitachi 2077

Skema TV Hitachi 1408TY

Skema TV Hitachi 1408RX

Skema TV Konka k1438c

Skema TV LG ct21q66

Skema TV Changhong 29fx6alx

Skema TV Changhong_21bm91

Skema TV Akira 14ths3ce_om8370

Skema TV Toshiba 3339DB

Skema TV Toshiba 2939B

Skema TV Toshiba 2539DB

Skema TV Toshiba 2140TD

Skema TV Toshiba 2104XS

Skema TV Toshiba 219X5MH

Skema TV Toshiba 218X8M

Skema TV Toshiba 34HF85-sm

Skema TV Toshiba 34HF84-sm

Skema TV Toshiba 34HDX82-sm

Skema TV Toshiba 29AS42-svm

SKema TV Toshiba 32AF41-sm

Skema TV Toshiba 20A44-sm

Skema TV Toshiba 20A43-sm

Skema TV Toshiba 20A42-svm

Skema TV Toshiba 20A22-svm

Skema TV Toshiba 19A25-sm

Skema TV Polytron strf6653-tb1238

Skema TV Toshiba 29cz5 de

Skema TV Toshiba 2140td

Skema TV Toshiba 218x8m

Skema TV Sharp ctv 14r20 - 20r200

Skema TV Polytron strs6706-

Skema TV Sharp ix3368

Skema TV Sharp 20R200

Skema TVPanasonik_tc